Cracked old concrete next to a new replacement slab at a Coral Springs home

Concrete Repair & Replacement: Real Fixes, Not Patchwork

Damaged concrete rarely fixes itself. Small cracks let water in, sunken slabs create trip hazards, and flaking surfaces get worse every rainy season. Coral Springs Concrete Company inspects your concrete, explain what is really going on, and give you an honest choice between repair and replacement for your property.

Get a Free Inspection Quote

Schedule Slab Inspection

— Damage Assessment Guide

Signs Your Concrete Needs Attention

Not every flaw is urgent. Use this list to judge what you are seeing.

Usually Cosmetic

Worth Checking Soon

Fix Now

Hairline cracks thinner than a credit card edge

Light surface stains

Slight color fading

Cracks that keep widening

Chips along joints and edges

Rough, flaking, or peeling surface

Water pooling where it did not before

Gaps opening between slabs

One slab sitting higher or lower than its neighbor

A slab that rocks or sounds hollow

Cracks with uneven edges or a visible step

Sinking near the house, pool, or drain

Exposed rebar or crumbling edges

The "fix now" group can cause falls and let water erode the soil underneath, which turns a small repair into a big one.

Repair Services We Offer

Crack Repair

We clean, fill, and seal cracks so water and debris stay out. We also check why the crack formed. If movement caused it, we plan for that, or the crack will return.

Crew patching a broken concrete corner in Coral Springs

Patching and Edge Repair

Broken corners, chipped edges, and damaged joints can often be rebuilt. We cut out weak concrete, bond new material, and shape it to match the surrounding slab.

Scaling and flaking concrete surface needing repair

Surface Damage Repair

Flaking, scaling, and pitting are signs of surface failure. We remove loose material, repair the area, and protect it. If the damage covers most of the slab, we may suggest resurfacing or replacement instead.

Sunken or Uneven Slab Repair

When a section drops, we find out whether the base washed out, roots pushed it, or something else went wrong. Depending on the cause, the fix may be lifting and leveling or replacing that section.

Joint and Seal Repair

Open, cracked, or missing joint sealant lets water into the base. We clean the joints and refill them with the right flexible material.

Replacement Services We Offer

Full/partial Replacement

When the base is gone, cracks run across most of the slab, or the surface has failed, replacing the whole area is the honest choice. We remove the old concrete, fix the base, and pour new.

Crew removing damaged concrete for replacement

Demolition and Haul-Away

We break out, load, and remove old concrete so your site is ready for the new pour.

— Assessment Methodology

Repair or Replace: How We Decide

Every damaged slab tells a story. Before giving quotes or recommending concrete work, our team inspects the root conditions to determine whether targeted restoration or total replacement is your most durable, cost-effective investment.

• Step 01

• Step 02

• Step 03

Find the Cause

Check the Base

Measure the Damage

We look for soil washout, root pressure, poor drainage, missing joints, or heavy loads to identify exactly why the concrete moved or fractured.

If the soil beneath is unstable, a surface fix will not last. We inspect subgrade integrity, voids, and compaction under Florida rain patterns.

We note crack width, slab height changes, and how much of the surface is affected to verify if structural stability is intact.

• Step 04

• Step 05

Consider Your Goals

Give You Options

A short-term patch before selling the house is different from an engineered, long-term fix intended to protect driveway or patio value for decades.

We explain clear, transparent choices. We explain what each choice costs, how long it should last, and what could go wrong.

Prevent Future Damage

Keep gutters and downspouts directing water away from slabs.

Trim roots and avoid planting trees close to paved areas.

Seal joints and cracks early.

Avoid parking heavy vehicles on thin slabs or edges.

Fix drainage problems before they erode the soil.

— Structured Workflow

What to Expect During a Repair or Replacement

Every slab failure stems from specific subgrade conditions or thermal stress. We follow a controlled four-phase methodology to restore structural stability and eliminate recurrence across Coral Springs properties.

1. Site Assessment

2. Sub-Base Prep

3. Forming & Pouring

4. Jointing & Curing

We inspect subsurface washout, evaluate root interference, and test slab pitch to determine whether lifting, stitching, or total removal is required.

Failed sections are cleanly saw-cut and removed. We re-grade with crushed aggregate, vibrating and compacting to lock in an immovable foundational bed.

Heavy-duty formwork and steel dowel tie-ins are locked into place before pouring high-strength, weather-rated Florida spec concrete mix.

Precision contraction joints are hand-tooled or saw-cut, followed by continuous curing and premium penetrating sealant to resist seasonal rainfall.

Stamped and Decorative Concrete FAQs in Coral Springs, FL

How do I know if a crack in my concrete is serious?

Look at width, direction, and movement. Hairline cracks are often just shrinkage and mostly cosmetic. Cracks wider than about a quarter inch, cracks that keep growing, or cracks where one side sits higher than the other point to a deeper problem. If you see a step or the slab moves, have it checked soon.

Can sunken concrete be lifted instead of replaced?

Sometimes. If the slab is still in good shape and the problem is a void under it, lifting and leveling may work. If the slab is cracked into pieces or the soil keeps washing out, replacement is usually the better long-term choice. We inspect it and tell you which path fits.

Will a repaired area match the rest of my concrete?

Not always perfectly. Old concrete weathers, fades, and picks up stains, so fresh material often looks different. We can tint patches and blend edges to get close. If an exact match matters, resurfacing the whole slab may give a more even look.

Why is my concrete surface flaking or peeling, and can it be fixed?

This damage is called scaling or spalling. Common causes include water getting into the surface, poor finishing, weak concrete, or harsh cleaners. Small areas can be repaired. If most of the surface is affected, resurfacing or replacement is usually more reliable.

Does homeowners insurance cover concrete repair?

Often not, because most policies exclude wear, settling, and soil movement. Some sudden events, like certain types of storm or water damage, may be treated differently. Check your policy or ask your agent. We can provide a written scope and photos to support a claim.

Can I fix cracks myself?

For small, stable cracks, a store-bought filler may work as a temporary fix. It will not solve movement, drainage, or base problems, and patches can look uneven. If the crack is wide, growing, or on a slab that has shifted, get it inspected before you spend money on a patch.

Explore our other services

Get Your Concrete Checked

Send us photos or schedule a visit. We will tell you what is wrong, what your options are, and what each one will cost, in writing.